section 0.2.0 added to CHANGELOG

README updated, use section added.

default config.toml dir updated

CHANGELOG.md

@@ -9,23 +9,35 @@ Before any major/minor/patch bump all unit tests will be run to verify they pass
 
 ## [Unreleased]
 
-- [x]
+-   [x]
+
+# [0.2.0] - 2024-10-27
+
+### Added
+
+-   `config` flag (shorthand `C`), you may now specify a custom config directory. It defaults to `home directory / .config / vbantxt_cli /`.
+    -   please note, the default directory has changed from v0.1.0
+
+### Changed
+
+-   Behaviour change: if any one of `"host", "h", "port", "p", "streamname", "s"` flags are passed then the config file will be ignored.
+-   `delay` flag changed to `ratelimit` (shorthand `r`). It defaults to 20ms.
 
 # [0.1.0] - 2024-06-28
 
 ### Added
 
-- Matrix and Logging sections to README.
+-   Matrix and Logging sections to README.
 
 ### Changed
 
-- `host` flag now defaults to "localhost". Useful if sending VBAN-Text to Matrix
-- `loglevel` flag now expects values that correspond to the logrus package loglevels (0 up to 6). See README.
-- Config values are only applied if the corresponding flag was not passed on the command line.
+-   `host` flag now defaults to "localhost". Useful if sending VBAN-Text to Matrix
+-   `loglevel` flag now expects values that correspond to the logrus package loglevels (0 up to 6). See README.
+-   Config values are only applied if the corresponding flag was not passed on the command line.
 
 # [0.0.1] - 2022-09-23
 
 ### Added
 
-- Initial release, package implements VBAN PROTOCOL TXT with a basic CLI for configuring options.
-- Ability to load configuration settings from a config.toml.
+-   Initial release, package implements VBAN PROTOCOL TXT with a basic CLI for configuring options.
+-   Ability to load configuration settings from a config.toml.

README.md

@@ -1,41 +1,69 @@
 ![Windows](https://img.shields.io/badge/Windows-0078D6?style=for-the-badge&logo=windows&logoColor=white)
 ![Linux](https://img.shields.io/badge/Linux-FCC624?style=for-the-badge&logo=linux&logoColor=black)
 
-# VBAN Sendtext CLI Utility
+# VBAN Sendtext
 
-Send Voicemeeter string requests over a network or to Matrix
+Send Voicemeeter/Matrix vban requests.
 
 For an outline of past/future changes refer to: [CHANGELOG](CHANGELOG.md)
 
-## `Tested against`
+## Tested against
 
-- Basic 1.1.1.1
-- Banana 2.1.1.1
-- Potato 3.1.1.1
-- Matrix 1.0.0.3
+-   Basic 1.0.8.4
+-   Banana 2.0.6.4
+-   Potato 3.0.2.4
+-   Matrix 1.0.0.3
 
-## `Requirements`
+## Requirements
 
-- [Voicemeeter](https://voicemeeter.com/) or [Matrix](https://vb-audio.com/Matrix/)
-- Go 1.18 or greater (if you want to compile yourself, otherwise check `Releases`)
+-   [Voicemeeter](https://voicemeeter.com/) or [Matrix](https://vb-audio.com/Matrix/)
+-   Go 1.18 or greater (if you want to compile yourself, otherwise check `Releases`)
 
 ---
 
+## `Use`
+
+`go get github.com/onyx-and-iris/vbantxt`
+
+```go
+package main
+
+import (
+	"log"
+
+	"github.com/onyx-and-iris/vbantxt"
+)
+
+func main() {
+	var (
+		host       string = "vm.local"
+		port       int    = 6980
+		streamname string = "onyx"
+	)
+
+	vbantxtClient, err := vbantxt.New(host, port, streamname)
+	if err != nil {
+		log.Fatal(err)
+	}
+	defer vbantxtClient.Close()
+
+	err = vbantxtClient.Send("strip[0].mute=0")
+	if err != nil {
+		_, _ = fmt.Fprintf(os.Stderr, "Error: %s", err)
+		os.Exit(1)
+	}
+}
+```
+
 ## `Command Line`
 
-#### Flags
-
-- `host` defaults to "localhost"
-- `port` defaults to 6980
-- `streamname` defaults to "Command1"
-
 Pass `host`, `port` and `streamname` as flags, for example:
 
 ```
 vbantxt-cli -h="gamepc.local" -p=6980 -s=Command1 "strip[0].mute=1 strip[1].mono=1"
 ```
 
-You may also store them in a `config.toml` located in `home directory / .vbantxt_cli /`
+You may also store them in a `config.toml` located in `home directory / .config / vbantxt_cli /`
 
 A valid `config.toml` might look like this:
 
@@ -46,22 +74,14 @@ Port=6980
 Streamname="Command1"
 ```
 
+-   `host` defaults to "localhost"
+-   `port` defaults to 6980
+-   `streamname` defaults to "Command1"
+
 Command line flags will override values in a config.toml.
 
 ---
 
-## `Matrix`
-
-Sending commands to VB-Audio Matrix is also possible, for example:
-
-```
-vbantxt-cli -s=streamname "Point(ASIO128.IN[2],ASIO128.OUT[1]).dBGain = -8"
-```
-
-A documentation of all available Matrix instructions can be found on the [Voicemeeter forum][matrix-commands].
-
----
-
 ## `Script files`
 
 The vbantxt-cli utility accepts a single string request or an array of string requests. This means you can pass scripts stored in files.
@@ -74,7 +94,7 @@ Or with Bash:
 
 `cat script.txt | xargs vbantxt-cli`
 
-to load Voicemeeter commands from a file:
+to load commands from a file:
 
 ```
 strip[0].mute=1;strip[0].mono=0
@@ -82,25 +102,22 @@ strip[1].mute=0;strip[1].mono=1
 bus[3].eq.On=0
 ```
 
-or for Matrix:
+---
+
+## `Matrix`
+
+Sending commands to VB-Audio Matrix is also possible, for example:
 
 ```
-Point(ASIO128.IN[1..4],ASIO128.OUT[1]).dBGain = -3
-Point(ASIO128.IN[1..4],ASIO128.OUT[2]).dBGain = -3
-Point(ASIO128.IN[1..4],ASIO128.OUT[1]).Mute = 1
-Point(ASIO128.IN[1..4],ASIO128.OUT[2]).Mute = 1
+vbantxt-cli -s=streamname "Point(ASIO128.IN[2],ASIO128.OUT[1]).dBGain = -8"
 ```
 
 ---
 
 ## `Logging`
 
-Pass the `-l` flag with an argument from 0 up to 6.
+Log level may be set by passing the `-l` flag with a number from 0 up to 6 where
 
 0 = Panic, 1 = Fatal, 2 = Error, 3 = Warning, 4 = Info, 5 = Debug, 6 = Trace
 
-For example, to set the log level to Debug:
-
-`vbantxt-cli.exe -l=5 "strip[0].mute=0"`
-
-[matrix-commands]: https://forum.vb-audio.com/viewtopic.php?t=1883&sid=9802ac9ddd9beff9475611d52a2164ba
+Log level defaults to Warning level.