diff --git a/README.md b/README.md
index 81c1dbb..0c53ccf 100644
--- a/README.md
+++ b/README.md
@@ -8,14 +8,14 @@ For past/future changes to this project refer to: [CHANGELOG](CHANGELOG.md)
 
 ## Tested against
 
--   Basic 1.0.8.8
--   Banana 2.0.6.8
--   Potato 3.0.2.8
+- Basic 1.0.8.8
+- Banana 2.0.6.8
+- Potato 3.0.2.8
 
 ## Requirements
 
--   [Voicemeeter](https://voicemeeter.com/)
--   Powershell 5.1+ or Powershell 7.2+
+- [Voicemeeter](https://voicemeeter.com/)
+- Powershell 5.1+ or Powershell 7.2+
 
 ## Installation
 
@@ -35,9 +35,9 @@ When prompted you will need to accept PSGallery as a trusted repository.
 
 More Info:
 
--   [PowerShellGet](https://docs.microsoft.com/en-us/powershell/scripting/gallery/installing-psget?view=powershell-7.1)
--   [NuGet](https://www.powershellgallery.com/packages/NuGet/1.3.3)
--   [PSGallery](https://docs.microsoft.com/en-gb/powershell/scripting/gallery/overview?view=powershell-7.1)
+- [PowerShellGet](https://docs.microsoft.com/en-us/powershell/scripting/gallery/installing-psget?view=powershell-7.1)
+- [NuGet](https://www.powershellgallery.com/packages/NuGet/1.3.3)
+- [PSGallery](https://docs.microsoft.com/en-gb/powershell/scripting/gallery/overview?view=powershell-7.1)
 
 #### Direct download:
 
@@ -75,14 +75,14 @@ finally { $vmr.Logout() }
 
 Voicemeeter factory function can be:
 
--   Get-RemoteBasic
--   Get-RemoteBanana
--   Get-RemotePotato
+- Get-RemoteBasic
+- Get-RemoteBanana
+- Get-RemotePotato
 
 Added in `v3` you may also use the following entry/exit points:
 
--   Connect-Voicemeeter
--   Disconnect-Voicemeeter
+- Connect-Voicemeeter
+- Disconnect-Voicemeeter
 
 `Connect-Voicemeeter` takes a single parameter `Kind`.
 
@@ -115,31 +115,31 @@ $vmr.Logout()
 
 The following strip commands are available:
 
--   mute: boolean
--   mono: boolean
--   mc: boolean
--   k: int, from 0 to 4
--   solo: boolean
--   A1-A5: boolean
--   B1-B3: boolean
--   limit: int, from -40 to 12
--   gain: float, from -60.0 to 12.0
--   label: string
--   reverb: float, from 0.0 to 10.0
--   delay: float, from 0.0 to 10.0
--   fx1: float, from 0.0 to 10.0
--   fx2: float, from 0.0 to 10.0
--   pan_x: float, from -0.5 to 0.5
--   pan_y: float, from 0.0 to 1.0
--   color_x: float, from -0.5 to 0.5
--   color_y: float, from 0.0 to 1.0
--   fx_x: float, from -0.5 to 0.5
--   fx_y: float, from 0.0 to 1.0
--   postreverb: boolean
--   postdelay: boolean
--   postfx1: boolean
--   postfx2: boolean
--   gainlayer0-gainlayer7: float
+- mute: boolean
+- mono: boolean
+- mc: boolean
+- k: int, from 0 to 4
+- solo: boolean
+- A1-A5: boolean
+- B1-B3: boolean
+- limit: int, from -40 to 12
+- gain: float, from -60.0 to 12.0
+- label: string
+- reverb: float, from 0.0 to 10.0
+- delay: float, from 0.0 to 10.0
+- fx1: float, from 0.0 to 10.0
+- fx2: float, from 0.0 to 10.0
+- pan_x: float, from -0.5 to 0.5
+- pan_y: float, from 0.0 to 1.0
+- color_x: float, from -0.5 to 0.5
+- color_y: float, from 0.0 to 1.0
+- fx_x: float, from -0.5 to 0.5
+- fx_y: float, from 0.0 to 1.0
+- postreverb: boolean
+- postdelay: boolean
+- postfx1: boolean
+- postfx2: boolean
+- gainlayer0-gainlayer7: float
 
 for example:
 
@@ -157,15 +157,15 @@ mc, k for virtual strips only.
 
 The following strip.comp commands are available:
 
--   knob: float, from 0.0 to 10.0
--   gainin: float, from -24.0 to 24.0
--   ratio: float, from 1.0 to 8.0
--   threshold: float, from -40.0 to -3.0
--   attack: float, from 0.0 to 200.0
--   release: float, from 0.0 to 5000.0
--   knee: float, 0.0 to 1.0
--   gainout: float, from -24.0 to 24.0
--   makeup: boolean
+- knob: float, from 0.0 to 10.0
+- gainin: float, from -24.0 to 24.0
+- ratio: float, from 1.0 to 8.0
+- threshold: float, from -40.0 to -3.0
+- attack: float, from 0.0 to 200.0
+- release: float, from 0.0 to 5000.0
+- knee: float, 0.0 to 1.0
+- gainout: float, from -24.0 to 24.0
+- makeup: boolean
 
 for example:
 
@@ -177,13 +177,13 @@ $vmr.strip[3].comp.attack = 8.5
 
 The following strip.gate commands are available:
 
--   knob: float, from 0.0 to 10.0
--   threshold: float, from -60.0 to -10.0
--   damping: float, from -60.0 to -10.0
--   bpsidechain: int, from 100 to 4000
--   attack: float, from 0.0 to 1000.0
--   hold: float, from 0.0 to 5000.0
--   release: float, from 0.0 to 5000.0
+- knob: float, from 0.0 to 10.0
+- threshold: float, from -60.0 to -10.0
+- damping: float, from -60.0 to -10.0
+- bpsidechain: int, from 100 to 4000
+- attack: float, from 0.0 to 1000.0
+- hold: float, from 0.0 to 5000.0
+- release: float, from 0.0 to 5000.0
 
 for example:
 
@@ -195,7 +195,7 @@ $vmr.strip[3].gate.threshold = -40.5
 
 The following strip.denoiser commands are available:
 
--   knob: float, from 0.0 to 10.0
+- knob: float, from 0.0 to 10.0
 
 for example:
 
@@ -205,8 +205,8 @@ $vmr.strip[3].denoiser.knob = 5
 
 #### AppGain | AppMute
 
--   `AppGain(amount, gain)` : string, float
--   `AppMute(amount, mutestate)` : string, boolean
+- `AppGain(amount, gain)` : string, float
+- `AppMute(amount, mutestate)` : string, boolean
 
 for example:
 
@@ -215,19 +215,33 @@ $vmr.strip[5].AppGain("Spotify", 0.5)
 $vmr.strip[5].AppMute("Spotify", $true)
 ```
 
+#### levels
+
+The following strip.level commands are available:
+
+- PreFader()
+- PostFader()
+- PostMute()
+
+for example:
+
+```powershell
+$vmr.strip[2].levels.PreFader() -Join ', ' | Write-Host
+```
+
 ### Bus
 
 The following bus commands are available:
 
--   mute: bool
--   mono: bool
--   limit: int, from -40 to 12
--   gain: float, from -60.0 to 12.0
--   label: string
--   returnreverb: float, from 0.0 to 10.0
--   returndelay: float, from 0.0 to 10.0
--   returnfx1: float, from 0.0 to 10.0
--   returnfx2: float, from 0.0 to 10.0
+- mute: bool
+- mono: bool
+- limit: int, from -40 to 12
+- gain: float, from -60.0 to 12.0
+- label: string
+- returnreverb: float, from 0.0 to 10.0
+- returndelay: float, from 0.0 to 10.0
+- returnfx1: float, from 0.0 to 10.0
+- returnfx2: float, from 0.0 to 10.0
 
 for example:
 
@@ -239,22 +253,22 @@ $vmr.bus[3].returnreverb = 5.7
 
 The following bus.mode members are available:
 
--   normal: boolean
--   amix: boolean
--   bmix: boolean
--   repeat: boolean
--   composite: boolean
--   tvmix: boolean
--   upmix21: boolean
--   upmix41: boolean
--   upmix61: boolean
--   centeronly: boolean
--   lfeonly: boolean
--   rearonly: boolean
+- normal: boolean
+- amix: boolean
+- bmix: boolean
+- repeat: boolean
+- composite: boolean
+- tvmix: boolean
+- upmix21: boolean
+- upmix41: boolean
+- upmix61: boolean
+- centeronly: boolean
+- lfeonly: boolean
+- rearonly: boolean
 
 The following bus.mode commands are available:
 
--   Get(): returns the current bus mode.
+- Get(): returns the current bus mode.
 
 for example:
 
@@ -264,18 +278,30 @@ $vmr.bus[0].mode.centeronly = $true
 $vmr.bus[0].mode.Get()
 ```
 
+#### levels
+
+The following strip.level commands are available:
+
+- All()
+
+for example:
+
+```powershell
+$vmr.bus[2].levels.All() -Join ', ' | Write-Host
+```
+
 ### Strip|Bus
 
 #### device
 
 The following strip.device | bus.device commands are available:
 
--   name: string
--   sr: int
--   wdm: string
--   ks: string
--   mme: string
--   asio: string
+- name: string
+- sr: int
+- wdm: string
+- ks: string
+- mme: string
+- asio: string
 
 for example:
 
@@ -291,8 +317,8 @@ wdm, ks, mme, asio are defined as write only.
 
 The following strip.eq | bus.eq commands are available:
 
--   on: boolean
--   ab: boolean
+- on: boolean
+- ab: boolean
 
 for example:
 
@@ -303,8 +329,8 @@ $vmr.bus[0].eq.ab = $false
 
 #### FadeTo | FadeBy
 
--   `FadeTo(amount, time)` : float, int
--   `FadeBy(amount, time)` : float, int
+- `FadeTo(amount, time)` : float, int
+- `FadeBy(amount, time)` : float, int
 
 Modify gain to or by the selected amount in db over a time interval in ms.
 
@@ -319,9 +345,9 @@ $vmr.bus[0].FadeBy(-10, 500)
 
 Three modes defined: state, stateonly and trigger.
 
--   State runs associated scripts
--   Stateonly does not run associated scripts
--   Index range (0, 69)
+- State runs associated scripts
+- Stateonly does not run associated scripts
+- Index range (0, 69)
 
 ```powershell
 $vmr.button[3].state = $true
@@ -333,19 +359,19 @@ $vmr.button[5].trigger = $true
 
 ### VBAN
 
--   vmr.vban.enable: Toggle VBAN on or off. Accepts a boolean value.
+- vmr.vban.enable: Toggle VBAN on or off. Accepts a boolean value.
 
 For each vban in/out stream the following parameters are defined:
 
--   on: boolean
--   name: string
--   ip: string
--   port: int from 1024 - 65535
--   sr: int (11025, 16000, 22050, 24000, 32000, 44100, 48000, 64000, 88200, 96000)
--   channel: int from 1 to 8
--   bit: int 16 or 24
--   quality: int from 0 to 4
--   route: int from 0 to 8
+- on: boolean
+- name: string
+- ip: string
+- port: int from 1024 - 65535
+- sr: int (11025, 16000, 22050, 24000, 32000, 44100, 48000, 64000, 88200, 96000)
+- channel: int from 1 to 8
+- bit: int 16 or 24
+- quality: int from 0 to 4
+- route: int from 0 to 8
 
 SR, channel and bit are defined as readonly for instreams. Attempting to write
 to those parameters will throw an error. They are read and write for outstreams.
@@ -366,16 +392,16 @@ Certain 'special' commands are defined by the API as performing actions rather t
 
 The following methods are available:
 
--   show
--   hide
--   restart
--   shutdown
--   Load(filepath)
+- show
+- hide
+- restart
+- shutdown
+- Load(filepath)
 
 The following properties are write only and accept boolean values:
 
--   showvbanchat
--   lock
+- showvbanchat
+- lock
 
 example:
 
@@ -391,18 +417,18 @@ $vmr.command.Load("path/to/filename.xml")
 
 The following methods are available:
 
--   play
--   stop
--   pause
--   record
--   ff
--   rew
+- play
+- stop
+- pause
+- record
+- ff
+- rew
 
 The following properties accept boolean values.
 
--   loop
--   A1 - A5
--   B1 - B3
+- loop
+- A1 - A5
+- B1 - B3
 
 example:
 
@@ -460,9 +486,9 @@ will load a config file at profiles/banana/config.psd1 for Voicemeeter Banana.
 
 Access to lower level Getters and Setters are provided with these functions:
 
--   `$vmr.Getter(param)`: For getting the value of a parameter expected to return a value other than string.
--   `$vmr.Getter_String(param)`: For getting the value of any parameter expected to return a string.
--   `$vmr.Setter(param, value)`: For setting the value of any parameter.
+- `$vmr.Getter(param)`: For getting the value of a parameter expected to return a value other than string.
+- `$vmr.Getter_String(param)`: For getting the value of any parameter expected to return a string.
+- `$vmr.Setter(param, value)`: For setting the value of any parameter.
 
 ```powershell
 $vmr.Getter('Strip[2].Mute')
@@ -471,7 +497,7 @@ $vmr.Setter('Strip[4].Label', 'stripname')
 $vmr.Setter('Strip[0].Gain', -3.6)
 ```
 
--   `$vmr.SendText`: Set parameters by script
+- `$vmr.SendText`: Set parameters by script
 
 ```powershell
  $vmr.SendText("strip[0].mute=1;strip[2].gain=3.8;bus[1].eq.On=1")
@@ -479,17 +505,17 @@ $vmr.Setter('Strip[0].Gain', -3.6)
 
 Access to lower level polling functions are provided with these functions:
 
--   `$vmr.PDirty`: Returns true if a parameter has been updated.
--   `$vmr.MDirty`: Returns true if a macrobutton has been updated.
+- `$vmr.PDirty`: Returns true if a parameter has been updated.
+- `$vmr.MDirty`: Returns true if a macrobutton has been updated.
 
 ### Run tests
 
 Run tests using .\tests\pre-commit.ps1 which accepts the following parameters:
 
--   `kind`: Run tests of this kind
--   `tag`: Run tests tagged with this marker (currently `higher` or `lower`)
--   `num`: Run this number of tests
--   `log`: Write summary log file
+- `kind`: Run tests of this kind
+- `tag`: Run tests tagged with this marker (currently `higher` or `lower`)
+- `num`: Run this number of tests
+- `log`: Write summary log file
 
 Run tests from repository root in a subshell and write logs, like so:
 
@@ -497,4 +523,4 @@ Run tests from repository root in a subshell and write logs, like so:
 
 ### Official Documentation
 
--   [Voicemeeter Remote C API](https://github.com/onyx-and-iris/Voicemeeter-SDK/blob/update-docs/VoicemeeterRemoteAPI.pdf)
+- [Voicemeeter Remote C API](https://github.com/onyx-and-iris/Voicemeeter-SDK/blob/update-docs/VoicemeeterRemoteAPI.pdf)
diff --git a/lib/base.ps1 b/lib/base.ps1
index c621e84..543fd94 100644
--- a/lib/base.ps1
+++ b/lib/base.ps1
@@ -23,7 +23,7 @@ function Login {
             New-Variable -Name vmExe -Value 0
 
             if ( $kindId -eq "basic" ) { $vmExe = 1 }
-            elseif ( $kindId -eq "banana" ) {  $vmExe = 2 }
+            elseif ( $kindId -eq "banana" ) { $vmExe = 2 }
             elseif ( $kindId -eq "potato" ) {
                 $vmExe = $(if ([Environment]::Is64BitOperatingSystem) { 6 } else { 3 })
             }
@@ -203,3 +203,18 @@ function Set_By_Script {
         Write-Warning $_.Exception.ErrorMessage()
     }
 }
+
+function Get_Level {
+    param(
+        [int64]$MODE, [int64]$INDEX
+    )
+    New-Variable -Name ptr -Value 0.0
+    try {
+        $retval = [int][Voicemeeter.Remote]::VBVMR_GetLevel($MODE, $INDEX, [ref]$ptr)
+        if ($retval) { throw [CAPIError]::new($retval, $MyInvocation.MyCommand) }
+    }
+    catch [CAPIError] {
+        Write-Warning $_.Exception.ErrorMessage()
+    }
+    [float]$ptr
+}
\ No newline at end of file
diff --git a/lib/binding.ps1 b/lib/binding.ps1
index bd69faf..ad23456 100644
--- a/lib/binding.ps1
+++ b/lib/binding.ps1
@@ -47,6 +47,9 @@ function Setup_DLL {
 
     [DllImport(@"$dll")]
     public static extern int VBVMR_SetParameters(String param);
+
+    [DllImport(@"$dll")]
+    public static extern int VBVMR_GetLevel(Int64 mode, Int64 index, ref float ptr);
 "@
 
     Add-Type -MemberDefinition $Signature -Name Remote -Namespace Voicemeeter -PassThru | Out-Null
diff --git a/lib/bus.ps1 b/lib/bus.ps1
index c8198f8..ba2c9f0 100644
--- a/lib/bus.ps1
+++ b/lib/bus.ps1
@@ -33,6 +33,7 @@ class IBus {
 class Bus : IBus {
     [Object]$mode
     [Object]$eq
+    [Object]$levels
 
     Bus ([int]$index, [Object]$remote) : base ($index, $remote) {
         AddBoolMembers -PARAMS @('mono', 'mute')
@@ -41,6 +42,7 @@ class Bus : IBus {
 
         $this.mode = [Mode]::new($index, $remote)
         $this.eq = [Eq]::new($index, $remote)
+        $this.levels = [Levels]::new($index, $remote)
     }
 
     [void] FadeTo ([single]$target, [int]$time) {
@@ -52,6 +54,37 @@ class Bus : IBus {
     }
 }
 
+class Levels : IBus {
+    [int]$init
+    [int]$offset
+
+    Levels ([int]$index, [Object]$remote) : base ($index, $remote) {
+        $this.init = $index * 8
+        $this.offset = 8            
+    }
+
+    [float] Convert([float]$val) {
+        if ($val -gt 0) { 
+            return [math]::Round(20 * [math]::Log10($val), 1) 
+        } 
+        else { 
+            return -200.0 
+        }
+    }
+
+    [System.Collections.ArrayList] Getter([int]$mode) {
+        [System.Collections.ArrayList]$vals = @()
+        $this.init..$($this.init + $this.offset - 1) | ForEach-Object {
+            $vals.Add($this.Convert($(Get_Level -MODE $mode -INDEX $_)))
+        }
+        return $vals
+    }
+
+    [System.Collections.ArrayList] All() {
+        return $this.Getter(3)
+    }
+}
+
 class Mode : IBus {
     [System.Collections.ArrayList]$modes
 
diff --git a/lib/strip.ps1 b/lib/strip.ps1
index fdd7253..3158855 100644
--- a/lib/strip.ps1
+++ b/lib/strip.ps1
@@ -27,6 +27,8 @@ class IStrip {
 }
 
 class Strip : IStrip {
+    [Object]$levels
+
     Strip ([int]$index, [Object]$remote) : base ($index, $remote) {
         AddBoolMembers -PARAMS @('mono', 'solo', 'mute')
         AddIntMembers -PARAMS @('limit')
@@ -35,6 +37,8 @@ class Strip : IStrip {
 
         AddChannelMembers
         AddGainlayerMembers
+
+        $this.levels = [Levels]::new($index, $remote)
     }
 
     [string] ToString() {
@@ -50,6 +54,52 @@ class Strip : IStrip {
     }
 }
 
+class Levels : IStrip {
+    [int]$init
+    [int]$offset
+
+    Levels ([int]$index, [Object]$remote) : base ($index, $remote) {
+        $p_in = $remote.kind.p_in
+        if ($index -lt $p_in) {
+            $this.init = $index * 2
+            $this.offset = 2            
+        }
+        else {
+            $this.init = ($p_in * 2) + (($index - $p_in) * 8)
+            $this.offset = 8
+        }
+    }
+
+    [float] Convert([float]$val) {
+        if ($val -gt 0) { 
+            return [math]::Round(20 * [math]::Log10($val), 1) 
+        } 
+        else { 
+            return -200.0 
+        }
+    }
+
+    [System.Collections.ArrayList] Getter([int]$mode) {
+        [System.Collections.ArrayList]$vals = @()
+        $this.init..$($this.init + $this.offset - 1) | ForEach-Object {
+            $vals.Add($this.Convert($(Get_Level -MODE $mode -INDEX $_)))
+        }
+        return $vals
+    }
+
+    [System.Collections.ArrayList] PreFader() {
+        return $this.Getter(0)
+    }
+
+    [System.Collections.ArrayList] PostFader() {
+        return $this.Getter(1)
+    }
+
+    [System.Collections.ArrayList] PostMute() {
+        return $this.Getter(2)
+    }
+}
+
 class PhysicalStrip : Strip {
     [Object]$comp
     [Object]$gate