closes #10

minor bump

README.md

@@ -8,7 +8,7 @@ A remote control app for [Voicemeeter][voicemeeter], designed to be used with th
 
 For an outline of this projects goals see the [SPECIFICATION][spec].
 
-<img src="./img/settings.png" width=350 alt="Image of Voicemeeter NVDA app settings tab">
+<img src="./img/nvda-voicemeeter.png" width=960 alt="Image of Voicemeeter NVDA app settings tab">
 
 ## Requirements
 
@@ -57,7 +57,7 @@ import nvda_voicemeeter
 
 KIND_ID = "potato"
 
-with voicemeeterlib.api(KIND_ID, sync=True) as vm:
+with voicemeeterlib.api(KIND_ID) as vm:
     with nvda_voicemeeter.draw(KIND_ID, vm) as window:
         window.run()
 ```
@@ -94,7 +94,17 @@ To adjust Patch Asio Inputs to Strips and Patch Insert values use `UP` and `DOWN
 
 To access Advanced Settings you may press the Advanced Settings button or use `Control + A` when in the `Settings` tab.
 
-#### `Strip/Bus`
+#### `Physical Strip|Virtual Strip|Buses`
+
+You will find in each of these tabs two nested tabs,`Buttons` and `Sliders`. For each nested tab you will find the controls appropriate for the Voicemeeter kind and channel type.
+
+All buttons may be triggered by pressing `SPACE` or `ENTER`.
+
+All sliders may be controlled in three different ways:
+
+- `Left|Right arrow` to move a slider by 1 step.
+- `Shift + Left|Right arrow` to move a slider by 0.1 steps.
+- `Control + Left|Right arrow` to move a slider by 3 steps.
 
 To rename a strip/bus channel navigate to the relevant tab, then press `F2`. This will open a popup window where you can set the channel index (with a spinbox) and set the new label using a text input box.
 
@@ -114,6 +124,30 @@ The `Save Settings` option opens a popup window with two buttons, `Browse` and `
 
 `Load Settings` and `Load on Startup` both open an Open dialog box immediately.
 
+### `Quick access binds`
+
+There are a number of quick binds available to assist with faster navigation and general use.
+
+When focused on any one of "Physical Strip", "Virtual Strip" or "Buses" you may use `Control + Number` to skip to the corresponding channel.
+
+When focused on any single channel (Strip or Bus), the following binds exist:
+
+- `Alt + Number` will trigger the Bus output button corresponding to the number. For example `Alt + 3` will trigger the `A3` button
+- `Control + O` will trigger the Mono button
+- `Control + S` will trigger the Solo button
+- `Control + M` will trigger the Mute button
+
+You may also enter slider modes which allow for control of the channels sliders until the slider mode is exited. You may access the slider modes with the following binds:
+
+- `Control + U` will enter Audibility mode
+- `Control + G` will enter Gain mode
+- `Control + T` will enter Gate mode
+- `Control + L` will enter Limit mode
+
+To exit any of the slider modes press `Escape`.
+
+Once you are in a slider mode you may now control the slider that matches the slider mode. Slider mode binds are the same as the normal slider binds with the addition of the Alt keypress. For example, where you would normally use `Right Arrow` to shift a slider rightwards by 1 step, in slider mode you would now use `Alt + Right Arrow`.
+
 ### Issues
 
 If you have any questions/suggestions feel free to raise an issue or open a new discussion.

__main__.py

@@ -4,6 +4,6 @@ import nvda_voicemeeter
 
 KIND_ID = "potato"
 
-with voicemeeterlib.api(KIND_ID, sync=True) as vm:
+with voicemeeterlib.api(KIND_ID) as vm:
     with nvda_voicemeeter.draw(KIND_ID, vm) as window:
         window.run()

pyproject.toml

@@ -1,6 +1,6 @@
 [project]
 name = "nvda_voicemeeter"
-version = "0.2.2"
+version = "0.3.0"
 description = "A Voicemeeter app compatible with NVDA"
 authors = [
     { name = "onyx-and-iris", email = "code@onyxandiris.online" },

src/nvda_voicemeeter/builder.py

@@ -332,7 +332,7 @@ class Builder:
                     psg.Slider(
                         range=(-40, 12),
                         default_value=self.vm.strip[i].limit,
-                        resolution=0.1,
+                        resolution=1,
                         disable_number_display=True,
                         expand_x=True,
                         enable_events=True,
@@ -433,7 +433,7 @@ class Builder:
                     psg.Slider(
                         range=(-40, 12),
                         default_value=self.vm.strip[i].limit,
-                        resolution=0.1,
+                        resolution=1,
                         disable_number_display=True,
                         expand_x=True,
                         enable_events=True,

src/nvda_voicemeeter/compound.py

@@ -10,17 +10,13 @@ class LabelSlider(psg.Frame):
             size = 7
         else:
             size = 4
-        if param == "LIMIT":
-            resolution = 1
-        else:
-            resolution = 0.1
         layout = [
             [
                 psg.Text(param.capitalize(), size=size),
                 psg.Slider(
                     range=range_,
                     default_value=self.default_value(i, param),
-                    resolution=resolution,
+                    resolution=0.1,
                     disable_number_display=True,
                     size=(12, 16),
                     expand_x=True,

src/nvda_voicemeeter/popup.py

@@ -0,0 +1,164 @@
+import logging
+from pathlib import Path
+
+import PySimpleGUI as psg
+
+from . import util
+
+logger = logging.getLogger(__name__)
+
+
+class Popup:
+    def __init__(self, window):
+        self.window = window
+        self.logger = logger.getChild(type(self).__name__)
+
+    def save_as(self, message, title=None, initial_folder=None):
+        layout = [
+            [psg.Text(message)],
+            [
+                psg.FileSaveAs("Browse", initial_folder=str(initial_folder), file_types=(("XML", ".xml"),)),
+                psg.Button("Cancel"),
+            ],
+        ]
+        popup = psg.Window(title, layout, finalize=True)
+        popup["Browse"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Browse"].bind("<Return>", "||KEY ENTER")
+        popup["Cancel"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Cancel"].bind("<Return>", "||KEY ENTER")
+        filepath = None
+        while True:
+            event, values = popup.read()
+            self.logger.debug(f"event::{event}")
+            self.logger.debug(f"values::{values}")
+            if event in (psg.WIN_CLOSED, "Cancel"):
+                break
+            match parsed_cmd := self.window.parser.match.parseString(event):
+                case [[button], ["FOCUS", "IN"]]:
+                    if values["Browse"]:
+                        filepath = values["Browse"]
+                        break
+                    self.window.nvda.speak(button)
+                case [[button], ["KEY", "ENTER"]]:
+                    popup.find_element_with_focus().click()
+            self.logger.debug(f"parsed::{parsed_cmd}")
+        popup.close()
+        if filepath:
+            return Path(filepath)
+
+    def rename(self, message, title=None, tab=None):
+        if tab == "Physical Strip":
+            upper = self.window.kind.phys_in + 1
+        elif tab == "Virtual Strip":
+            upper = self.window.kind.virt_in + 1
+        elif tab == "Buses":
+            upper = self.window.kind.num_bus + 1
+
+        layout = [
+            [psg.Text(message)],
+            [
+                [
+                    psg.Spin(
+                        list(range(1, upper)), initial_value=1, size=2, enable_events=True, key=f"Index", readonly=True
+                    ),
+                    psg.Input(key="Edit"),
+                ],
+                [psg.Button("Ok"), psg.Button("Cancel")],
+            ],
+        ]
+        popup = psg.Window(title, layout, finalize=True)
+        popup["Index"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Edit"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Ok"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Ok"].bind("<Return>", "||KEY ENTER")
+        popup["Cancel"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Cancel"].bind("<Return>", "||KEY ENTER")
+        data = {}
+        while True:
+            event, values = popup.read()
+            self.logger.debug(f"event::{event}")
+            self.logger.debug(f"values::{values}")
+            if event in (psg.WIN_CLOSED, "Cancel"):
+                break
+            match parsed_cmd := self.window.parser.match.parseString(event):
+                case ["Index"]:
+                    val = values["Index"]
+                    self.window.nvda.speak(f"Index {val}")
+                case [[button], ["FOCUS", "IN"]]:
+                    if button == "Index":
+                        val = values["Index"]
+                        self.window.nvda.speak(f"Index {val}")
+                    else:
+                        self.window.nvda.speak(button)
+                case [[button], ["KEY", "ENTER"]]:
+                    popup.find_element_with_focus().click()
+                case ["Ok"]:
+                    data = values
+                    break
+            self.logger.debug(f"parsed::{parsed_cmd}")
+        popup.close()
+        return data
+
+    def advanced_settings(self, title):
+        def _make_buffering_frame() -> psg.Frame:
+            buffer = [
+                [
+                    psg.ButtonMenu(
+                        driver,
+                        size=(14, 2),
+                        menu_def=["", util.get_asio_samples_list(driver)],
+                        key=f"BUFFER {driver}",
+                    )
+                    for driver in ("MME", "WDM", "KS", "ASIO")
+                ],
+            ]
+            return psg.Frame("BUFFERING", buffer)
+
+        layout = []
+        steps = (_make_buffering_frame,)
+        for step in steps:
+            layout.append([step()])
+        layout.append([psg.Button("Exit", size=(8, 2))])
+
+        popup = psg.Window(title, layout, finalize=True)
+        buttonmenu_opts = {"takefocus": 1, "highlightthickness": 1}
+        for driver in ("MME", "WDM", "KS", "ASIO"):
+            popup[f"BUFFER {driver}"].Widget.config(**buttonmenu_opts)
+            popup[f"BUFFER {driver}"].bind("<FocusIn>", "||FOCUS IN")
+            popup[f"BUFFER {driver}"].bind("<space>", "||KEY SPACE", propagate=False)
+            popup[f"BUFFER {driver}"].bind("<Return>", "||KEY ENTER", propagate=False)
+        popup["Exit"].bind("<FocusIn>", "||FOCUS IN")
+        popup["Exit"].bind("<Return>", "||KEY ENTER")
+        while True:
+            event, values = popup.read()
+            self.logger.debug(f"event::{event}")
+            self.logger.debug(f"values::{values}")
+            if event in (psg.WIN_CLOSED, "Exit"):
+                break
+            match parsed_cmd := self.window.parser.match.parseString(event):
+                case ["BUFFER MME" | "BUFFER WDM" | "BUFFER KS" | "BUFFER ASIO"]:
+                    if values[event] == "Default":
+                        if "MME" in event:
+                            val = 1024
+                        elif "WDM" in event or "KS" in event:
+                            val = 512
+                        else:
+                            val = 0
+                    else:
+                        val = int(values[event])
+                    driver = event.split()[1]
+                    self.window.vm.set(f"option.buffer.{driver.lower()}", val)
+                    self.window.TKroot.after(
+                        200, self.window.nvda.speak, f"{driver} BUFFER {val if val else 'default'}"
+                    )
+                case [["BUFFER", driver], ["FOCUS", "IN"]]:
+                    val = int(self.window.vm.get(f"option.buffer.{driver.lower()}"))
+                    self.window.nvda.speak(f"{driver} BUFFER {val if val else 'default'}")
+                case [["BUFFER", driver], ["KEY", "SPACE" | "ENTER"]]:
+                    util.open_context_menu_for_buttonmenu(popup, f"BUFFER {driver}")
+                case [[button], ["FOCUS", "IN"]]:
+                    self.window.nvda.speak(button)
+                case [[button], ["KEY", "ENTER"]]:
+                    popup.find_element_with_focus().click()
+            self.logger.debug(f"parsed::{parsed_cmd}")
+        popup.close()

src/nvda_voicemeeter/window.py

@@ -8,6 +8,7 @@ from . import models, util
 from .builder import Builder
 from .nvda import Nvda
 from .parser import Parser
+from .popup import Popup
 
 logger = logging.getLogger(__name__)
 
@@ -34,6 +35,7 @@ class NVDAVMWindow(psg.Window):
         }
         self.nvda = Nvda()
         self.parser = Parser()
+        self.popup = Popup(self)
         self.builder = Builder(self)
         layout = self.builder.run()
         super().__init__(title, layout, return_keyboard_events=True, finalize=True)
@@ -136,7 +138,37 @@ class NVDAVMWindow(psg.Window):
             self[f"tabgroup||{tabname}"].bind("<Shift-KeyPress-Tab>", "||KEY SHIFT TAB")
         self.bind("<Control-KeyPress-Tab>", "CTRL-TAB")
         self.bind("<Control-Shift-KeyPress-Tab>", "CTRL-SHIFT-TAB")
+
+        # NAV
         self.bind("<Control-a>", "CTRL-A")
+        for i in range(1, 10):
+            self.bind(f"<Control-Key-{i}>", f"CTRL-{i}")
+        for i in range(1, 10):
+            self.bind(f"<Alt-Key-{i}>", f"ALT-{i}")
+        self.bind("<Control-o>", "CTRL-O")
+        self.bind("<Control-s>", "CTRL-S")
+        self.bind("<Control-m>", "CTRL-M")
+        if self.kind.name == "basic":
+            self.bind("<Control-u>", "AUDIBILITY MODE")
+            self.bind("<Control-g>", "GAIN MODE")
+        elif self.kind.name == "banana":
+            self.bind("<Control-g>", "GAIN MODE")
+            self.bind("<Control-c>", "COMP MODE")
+            self.bind("<Control-t>", "GATE MODE")
+            self.bind("<Control-l>", "LIMIT MODE")
+        else:
+            self.bind("<Control-g>", "GAIN MODE")
+            self.bind("<Control-c>", "COMP MODE")
+            self.bind("<Control-t>", "GATE MODE")
+            self.bind("<Control-d>", "DENOISER MODE")
+            self.bind("<Control-l>", "LIMIT MODE")
+
+        self.bind("<Alt-Left>", "LEFT")
+        self.bind("<Alt-Right>", "RIGHT")
+        self.bind("<Alt-Shift-KeyPress-Left>", "SHIFT-LEFT")
+        self.bind("<Alt-Shift-KeyPress-Right>", "SHIFT-RIGHT")
+        self.bind("<Alt-Control-KeyPress-Left>", "CTRL-LEFT")
+        self.bind("<Alt-Control-KeyPress-Right>", "CTRL-RIGHT")
 
         # Hardware In
         for i in range(self.vm.kind.phys_in):
@@ -245,160 +277,13 @@ class NVDAVMWindow(psg.Window):
             self[f"BUS {i}||SLIDER GAIN"].bind("<Control-KeyPress-Down>", "||KEY CTRL DOWN")
             self[f"BUS {i}||SLIDER GAIN"].bind("<Control-Shift-KeyPress-R>", "||KEY CTRL SHIFT R")
 
-    def popup_save_as(self, message, title=None, initial_folder=None):
-        layout = [
-            [psg.Text(message)],
-            [
-                psg.FileSaveAs("Browse", initial_folder=str(initial_folder), file_types=(("XML", ".xml"),)),
-                psg.Button("Cancel"),
-            ],
-        ]
-        window = psg.Window(title, layout, finalize=True)
-        window["Browse"].bind("<FocusIn>", "||FOCUS IN")
-        window["Browse"].bind("<Return>", "||KEY ENTER")
-        window["Cancel"].bind("<FocusIn>", "||FOCUS IN")
-        window["Cancel"].bind("<Return>", "||KEY ENTER")
-        filepath = None
-        while True:
-            event, values = window.read()
-            self.logger.debug(f"event::{event}")
-            self.logger.debug(f"values::{values}")
-            if event in (psg.WIN_CLOSED, "Cancel"):
-                break
-            match parsed_cmd := self.parser.match.parseString(event):
-                case [[button], ["FOCUS", "IN"]]:
-                    if values["Browse"]:
-                        filepath = values["Browse"]
-                        break
-                    self.nvda.speak(button)
-                case [[button], ["KEY", "ENTER"]]:
-                    window.find_element_with_focus().click()
-            self.logger.debug(f"parsed::{parsed_cmd}")
-        window.close()
-        if filepath:
-            return Path(filepath)
-
-    def popup_rename(self, message, title=None, tab=None):
-        if tab == "Physical Strip":
-            upper = self.kind.phys_in + 1
-        elif tab == "Virtual Strip":
-            upper = self.kind.virt_in + 1
-        elif tab == "Buses":
-            upper = self.kind.num_bus + 1
-
-        layout = [
-            [psg.Text(message)],
-            [
-                [
-                    psg.Spin(
-                        list(range(1, upper)), initial_value=1, size=2, enable_events=True, key=f"Index", readonly=True
-                    ),
-                    psg.Input(key="Edit"),
-                ],
-                [psg.Button("Ok"), psg.Button("Cancel")],
-            ],
-        ]
-        window = psg.Window(title, layout, finalize=True)
-        window["Index"].bind("<FocusIn>", "||FOCUS IN")
-        window["Edit"].bind("<FocusIn>", "||FOCUS IN")
-        window["Ok"].bind("<FocusIn>", "||FOCUS IN")
-        window["Ok"].bind("<Return>", "||KEY ENTER")
-        window["Cancel"].bind("<FocusIn>", "||FOCUS IN")
-        window["Cancel"].bind("<Return>", "||KEY ENTER")
-        data = {}
-        while True:
-            event, values = window.read()
-            self.logger.debug(f"event::{event}")
-            self.logger.debug(f"values::{values}")
-            if event in (psg.WIN_CLOSED, "Cancel"):
-                break
-            match parsed_cmd := self.parser.match.parseString(event):
-                case ["Index"]:
-                    val = values["Index"]
-                    self.nvda.speak(f"Index {val}")
-                case [[button], ["FOCUS", "IN"]]:
-                    if button == "Index":
-                        val = values["Index"]
-                        self.nvda.speak(f"Index {val}")
-                    else:
-                        self.nvda.speak(button)
-                case [[button], ["KEY", "ENTER"]]:
-                    window.find_element_with_focus().click()
-                case ["Ok"]:
-                    data = values
-                    break
-            self.logger.debug(f"parsed::{parsed_cmd}")
-        window.close()
-        return data
-
-    def popup_advanced_settings(self, title):
-        def _make_buffering_frame() -> psg.Frame:
-            buffer = [
-                [
-                    psg.ButtonMenu(
-                        driver,
-                        size=(14, 2),
-                        menu_def=["", util.get_asio_samples_list(driver)],
-                        key=f"BUFFER {driver}",
-                    )
-                    for driver in ("MME", "WDM", "KS", "ASIO")
-                ],
-            ]
-            return psg.Frame("BUFFERING", buffer)
-
-        layout = []
-        steps = (_make_buffering_frame,)
-        for step in steps:
-            layout.append([step()])
-        layout.append([psg.Button("Exit", size=(8, 2))])
-
-        window = psg.Window(title, layout, finalize=True)
-        buttonmenu_opts = {"takefocus": 1, "highlightthickness": 1}
-        for driver in ("MME", "WDM", "KS", "ASIO"):
-            window[f"BUFFER {driver}"].Widget.config(**buttonmenu_opts)
-            window[f"BUFFER {driver}"].bind("<FocusIn>", "||FOCUS IN")
-            window[f"BUFFER {driver}"].bind("<space>", "||KEY SPACE", propagate=False)
-            window[f"BUFFER {driver}"].bind("<Return>", "||KEY ENTER", propagate=False)
-        window["Exit"].bind("<FocusIn>", "||FOCUS IN")
-        window["Exit"].bind("<Return>", "||KEY ENTER")
-        while True:
-            event, values = window.read()
-            self.logger.debug(f"event::{event}")
-            self.logger.debug(f"values::{values}")
-            if event in (psg.WIN_CLOSED, "Exit"):
-                break
-            match parsed_cmd := self.parser.match.parseString(event):
-                case ["BUFFER MME" | "BUFFER WDM" | "BUFFER KS" | "BUFFER ASIO"]:
-                    if values[event] == "Default":
-                        if "MME" in event:
-                            val = 1024
-                        elif "WDM" in event or "KS" in event:
-                            val = 512
-                        else:
-                            val = 0
-                    else:
-                        val = int(values[event])
-                    driver = event.split()[1]
-                    self.vm.set(f"option.buffer.{driver.lower()}", val)
-                    self.TKroot.after(200, self.nvda.speak, f"{driver} BUFFER {val if val else 'default'}")
-                case [["BUFFER", driver], ["FOCUS", "IN"]]:
-                    val = int(self.vm.get(f"option.buffer.{driver.lower()}"))
-                    self.nvda.speak(f"{driver} BUFFER {val if val else 'default'}")
-                case [["BUFFER", driver], ["KEY", "SPACE" | "ENTER"]]:
-                    util.open_context_menu_for_buttonmenu(window, f"BUFFER {driver}")
-                case [[button], ["FOCUS", "IN"]]:
-                    self.nvda.speak(button)
-                case [[button], ["KEY", "ENTER"]]:
-                    window.find_element_with_focus().click()
-            self.logger.debug(f"parsed::{parsed_cmd}")
-        window.close()
-
     def run(self):
         """
         Parses the event string and matches it to events
 
         Main thread will shutdown once a close or exit event occurs
         """
+        mode = None
 
         while True:
             event, values = self.read()
@@ -406,6 +291,18 @@ class NVDAVMWindow(psg.Window):
             self.logger.debug(f"values::{values}")
             if event in (psg.WIN_CLOSED, "Exit"):
                 break
+            elif event in ("GAIN MODE", "COMP MODE", "GATE MODE", "DENOISER MODE", "LIMIT MODE"):
+                mode = event
+                self.nvda.speak(f"{mode} enabled")
+            elif event == "Escape:27":
+                if mode:
+                    self.nvda.speak(f"{mode.split()[0]} mode disabled")
+                    mode = None
+
+            if mode:
+                if event in ("LEFT", "RIGHT", "SHIFT-LEFT", "SHIFT-RIGHT", "CTRL-LEFT", "CTRL-RIGHT"):
+                    self.write_event_value(f"SLIDER-MODE-{event}", mode.split()[0])
+                    continue
 
             match parsed_cmd := self.parser.match.parseString(event):
                 # Focus tabgroup
@@ -413,11 +310,90 @@ class NVDAVMWindow(psg.Window):
                     self["tabgroup"].set_focus()
                     self.nvda.speak(f"{values['tabgroup']}")
 
+                # Quick Navigation
+                case ["CTRL-1" | "CTRL-2" | "CTRL-3" | "CTRL-4" | "CTRL-5" | "CTRL-6" | "CTRL-7" | "CTRL-8" as bind]:
+                    key, index = bind.split("-")
+                    match values["tabgroup"]:
+                        case "tab||Physical Strip":
+                            if int(index) > self.kind.phys_in:
+                                continue
+                            self[f"STRIP {int(index) - 1}||A1"].set_focus()
+                            if (
+                                self.find_element_with_focus() is None
+                                or self.find_element_with_focus().Key != f"STRIP {int(index) - 1}||A1"
+                            ):
+                                self[f"STRIP {int(index) - 1}||SLIDER GAIN"].set_focus()
+                        case "tab||Virtual Strip":
+                            index = int(index) + self.kind.phys_in
+                            if index > self.kind.num_strip:
+                                continue
+                            self[f"STRIP {index - 1}||A1"].set_focus()
+                            if (
+                                self.find_element_with_focus() is None
+                                or self.find_element_with_focus().Key != f"STRIP {int(index) - 1}||A1"
+                            ):
+                                self[f"STRIP {int(index) - 1}||SLIDER GAIN"].set_focus()
+                        case "tab||Buses":
+                            if int(index) > self.kind.num_bus:
+                                continue
+                            self[f"BUS {int(index) - 1}||MONO"].set_focus()
+                            if (
+                                self.find_element_with_focus() is None
+                                or self.find_element_with_focus().Key != f"BUS {int(index) - 1}||MONO"
+                            ):
+                                self[f"BUS {int(index) - 1}||SLIDER GAIN"].set_focus()
+                case ["ALT-1" | "ALT-2" | "ALT-3" | "ALT-4" | "ALT-5" | "ALT-6" | "ALT-7" | "ALT-8" as bind]:
+                    if values["tabgroup"] not in ("tab||Physical Strip", "tab||Virtual Strip", "tab||Buses"):
+                        continue
+                    key, index = bind.split("-")
+                    if int(index) > self.kind.phys_out + self.kind.virt_out:
+                        continue
+                    if focus := self.find_element_with_focus():
+                        identifier, param = focus.Key.split("||")
+                        if int(index) <= self.kind.phys_out:
+                            self.write_event_value(f"{identifier}||A{int(index)}", None)
+                        else:
+                            self.write_event_value(f"{identifier}||B{int(index) - self.kind.phys_out}", None)
+                case ["CTRL-O"]:
+                    if values["tabgroup"] not in ("tab||Physical Strip", "tab||Virtual Strip", "tab||Buses"):
+                        continue
+                    if focus := self.find_element_with_focus():
+                        identifier, param = focus.Key.split("||")
+                        self.write_event_value(f"{identifier}||MONO", None)
+                case ["CTRL-S"]:
+                    if values["tabgroup"] not in ("tab||Physical Strip", "tab||Virtual Strip"):
+                        continue
+                    if focus := self.find_element_with_focus():
+                        identifier, param = focus.Key.split("||")
+                        self.write_event_value(f"{identifier}||SOLO", None)
+                case ["CTRL-M"]:
+                    if values["tabgroup"] not in ("tab||Physical Strip", "tab||Virtual Strip", "tab||Buses"):
+                        continue
+                    if focus := self.find_element_with_focus():
+                        identifier, param = focus.Key.split("||")
+                        self.write_event_value(f"{identifier}||MUTE", None)
+                case [
+                    "SLIDER-MODE-LEFT"
+                    | "SLIDER-MODE-RIGHT"
+                    | "SLIDER-MODE-SHIFT-LEFT"
+                    | "SLIDER-MODE-SHIFT-RIGHT"
+                    | "SLIDER-MODE-CTRL-LEFT"
+                    | "SLIDER-MODE-CTRL-RIGHT" as op
+                ]:
+                    op = op.removeprefix("SLIDER-MODE-").split("-")
+                    if values["tabgroup"] not in ("tab||Physical Strip", "tab||Virtual Strip", "tab||Buses"):
+                        continue
+                    param = values[event]
+                    if focus := self.find_element_with_focus():
+                        identifier, partial = focus.Key.split("||")
+                        if "SLIDER" not in partial:
+                            self.write_event_value(f"{identifier}||SLIDER {param}||KEY {' '.join(op)}", None)
+
                 # Rename popups
                 case ["F2:113"]:
-                    tab = values["tabgroup"]
+                    tab = values["tabgroup"].split("||")[1]
                     if tab in ("Physical Strip", "Virtual Strip", "Buses"):
-                        data = self.popup_rename("Label", title=f"Rename {tab}", tab=tab)
+                        data = self.popup.rename("Label", title=f"Rename {tab}", tab=tab)
                         if not data:  # cancel was pressed
                             continue
                         index = int(data["Index"]) - 1
@@ -453,7 +429,7 @@ class NVDAVMWindow(psg.Window):
                     )
                 case [["Save", "Settings"], ["MENU"]]:
                     initial_folder = Path.home() / "Documents" / "Voicemeeter"
-                    if filepath := self.popup_save_as(
+                    if filepath := self.popup.save_as(
                         "Open the file browser", title="Save As", initial_folder=initial_folder
                     ):
                         self.vm.set("command.save", str(filepath))
@@ -565,7 +541,7 @@ class NVDAVMWindow(psg.Window):
                     val = values[f"ASIO CHECKBOX||{in_num} {channel}"]
                     self.vm.patch.asio[index].set(val)
                     channel = ("left", "right")[int(channel)]
-                    self.nvda.speak(f"Patch ASIO {in_num} {channel} set to {val}")
+                    self.nvda.speak(str(val))
                 case [["ASIO", "CHECKBOX"], [in_num, channel], ["FOCUS", "IN"]]:
                     if self.find_element_with_focus() is not None:
                         val = values[f"ASIO CHECKBOX||{in_num} {channel}"]
@@ -599,9 +575,7 @@ class NVDAVMWindow(psg.Window):
                     )
                     val = values[f"INSERT CHECKBOX||{in_num} {channel}"]
                     self.vm.patch.insert[index].on = val
-                    self.nvda.speak(
+                    self.nvda.speak(f"{'on' if val else 'off'}")
-                        f"PATCH INSERT {in_num} {util._patch_insert_channels[int(channel)]} set to {'on' if val else 'off'}"
-                    )
                 case [["INSERT", "CHECKBOX"], [in_num, channel], ["FOCUS", "IN"]]:
                     if self.find_element_with_focus() is not None:
                         index = util.get_insert_checkbox_index(
@@ -617,7 +591,7 @@ class NVDAVMWindow(psg.Window):
                 # Advanced Settings
                 case ["ADVANCED SETTINGS"] | ["CTRL-A"]:
                     if values["tabgroup"] == "tab||Settings":
-                        self.popup_advanced_settings(title="Advanced Settings")
+                        self.popup.advanced_settings(title="Advanced Settings")
                 case [["ADVANCED", "SETTINGS"], ["FOCUS", "IN"]]:
                     self.nvda.speak("ADVANCED SETTINGS")
                 case [["ADVANCED", "SETTINGS"], ["KEY", "ENTER"]]:
@@ -641,19 +615,17 @@ class NVDAVMWindow(psg.Window):
                                     next_val = 0
                                 setattr(self.vm.strip[int(index)], actual, next_val)
                                 self.cache["strip"][f"STRIP {index}||{param}"] = next_val
-                                self.nvda.speak(
+                                self.nvda.speak(["off", "k m", "k 1", "k 2"][next_val])
-                                    f"{label} {phonetic.get(actual, actual)} {['off', 'k m', 'k 1', 'k 2'][next_val]}"
-                                )
                             else:
                                 val = not self.cache["strip"][f"STRIP {index}||{param}"]
                                 setattr(self.vm.strip[int(index)], actual, val)
                                 self.cache["strip"][f"STRIP {index}||{param}"] = val
-                                self.nvda.speak(f"{label} {phonetic.get(actual, actual)} {'on' if val else 'off'}")
+                                self.nvda.speak("on" if val else "off")
                         case _:
                             val = not self.cache["strip"][f"STRIP {index}||{param}"]
                             setattr(self.vm.strip[int(index)], param if param[0] in ("A", "B") else param.lower(), val)
                             self.cache["strip"][f"STRIP {index}||{param}"] = val
-                            self.nvda.speak(f"{label} {param} {'on' if val else 'off'}")
+                            self.nvda.speak("on" if val else "off")
                 case [["STRIP", index], [param], ["FOCUS", "IN"]]:
                     if self.find_element_with_focus() is not None:
                         val = self.cache["strip"][f"STRIP {index}||{param}"]
@@ -694,7 +666,6 @@ class NVDAVMWindow(psg.Window):
                         | "TREBLE" as param,
                     ],
                 ]:
-                    label = self.cache["labels"][f"STRIP {index}||LABEL"]
                     val = values[event]
                     match param:
                         case "GAIN":
@@ -709,7 +680,6 @@ class NVDAVMWindow(psg.Window):
                             self.vm.strip[int(index)].limit = val
                         case "BASS" | "MID" | "TREBLE":
                             setattr(self.vm.strip[int(index)], param.lower(), val)
-                    self.nvda.speak(f"{label} {param} slider {val}")
                 case [
                     ["STRIP", index],
                     [
@@ -728,9 +698,9 @@ class NVDAVMWindow(psg.Window):
                 ]:
                     if self.find_element_with_focus() is not None:
                         self.vm.event.pdirty = False
-                        label = self.cache["labels"][f"STRIP {index}||LABEL"]
                         val = values[f"STRIP {index}||SLIDER {param}"]
-                        self.nvda.speak(f"{label} {param} slider {int(val) if param == 'LIMIT' else val}")
+                        label = self.cache["labels"][f"STRIP {index}||LABEL"]
+                        self.nvda.speak(f"{label} {param} {int(val) if param == 'LIMIT' else val}")
                 case [
                     ["STRIP", index],
                     [
@@ -777,20 +747,26 @@ class NVDAVMWindow(psg.Window):
 
                     match param:
                         case "GAIN":
-                            self.vm.strip[int(index)].gain = util.check_bounds(val, (-60, 12))
+                            val = util.check_bounds(val, (-60, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-60, 12)))
+                            self.vm.strip[int(index)].gain = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "COMP" | "GATE" | "DENOISER":
-                            setattr(target, "knob", util.check_bounds(val, (0, 10)))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            setattr(target, "knob", val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "AUDIBILITY":
-                            self.vm.strip[int(index)].audibility = util.check_bounds(val, (0, 10))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            self.vm.strip[int(index)].audibility = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "BASS" | "MID" | "TREBLE":
-                            setattr(self.vm.strip[int(index)], param.lower(), util.check_bounds(val, (-12, 12)))
+                            val = util.check_bounds(val, (-12, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-12, 12)))
+                            setattr(self.vm.strip[int(index)], param.lower(), val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "LIMIT":
-                            self.vm.strip[int(index)].limit = util.check_bounds(val, (-40, 12))
+                            val = util.check_bounds(val, (-40, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-40, 12)))
+                            self.vm.strip[int(index)].limit = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
+                    self.nvda.speak(str(val))
                 case [
                     ["STRIP", index],
                     [
@@ -834,20 +810,26 @@ class NVDAVMWindow(psg.Window):
 
                     match param:
                         case "GAIN":
-                            self.vm.strip[int(index)].gain = util.check_bounds(val, (-60, 12))
+                            val = util.check_bounds(val, (-60, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-60, 12)))
+                            self.vm.strip[int(index)].gain = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "COMP" | "GATE" | "DENOISER":
-                            setattr(target, "knob", util.check_bounds(val, (0, 10)))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            setattr(target, "knob", val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "AUDIBILITY":
-                            self.vm.strip[int(index)].audibility = util.check_bounds(val, (0, 10))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            self.vm.strip[int(index)].audibility = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "BASS" | "MID" | "TREBLE":
-                            setattr(self.vm.strip[int(index)], param.lower(), util.check_bounds(val, (-12, 12)))
+                            val = util.check_bounds(val, (-12, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-12, 12)))
+                            setattr(self.vm.strip[int(index)], param.lower(), val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "LIMIT":
-                            self.vm.strip[int(index)].limit = util.check_bounds(val, (-40, 12))
+                            val = util.check_bounds(val, (-40, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-40, 12)))
+                            self.vm.strip[int(index)].limit = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
+                    self.nvda.speak(f"{param} {val}")
                 case [
                     ["STRIP", index],
                     [
@@ -891,20 +873,26 @@ class NVDAVMWindow(psg.Window):
 
                     match param:
                         case "GAIN":
-                            self.vm.strip[int(index)].gain = util.check_bounds(val, (-60, 12))
+                            val = util.check_bounds(val, (-60, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-60, 12)))
+                            self.vm.strip[int(index)].gain = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "COMP" | "GATE" | "DENOISER":
-                            setattr(target, "knob", util.check_bounds(val, (0, 10)))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            setattr(target, "knob", val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "AUDIBILITY":
-                            self.vm.strip[int(index)].audibility = util.check_bounds(val, (0, 10))
+                            val = util.check_bounds(val, (0, 10))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (0, 10)))
+                            self.vm.strip[int(index)].audibility = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "BASS" | "MID" | "TREBLE":
-                            setattr(self.vm.strip[int(index)], param.lower(), util.check_bounds(val, (-12, 12)))
+                            val = util.check_bounds(val, (-12, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-12, 12)))
+                            setattr(self.vm.strip[int(index)], param.lower(), val)
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
                         case "LIMIT":
-                            self.vm.strip[int(index)].limit = util.check_bounds(val, (-40, 12))
+                            val = util.check_bounds(val, (-40, 12))
-                            self[f"STRIP {index}||SLIDER {param}"].update(value=util.check_bounds(val, (-40, 12)))
+                            self.vm.strip[int(index)].limit = val
+                            self[f"STRIP {index}||SLIDER {param}"].update(value=val)
+                    self.nvda.speak(f"{param} {val}")
                 case [["STRIP", index], ["SLIDER", param], ["KEY", "CTRL", "SHIFT", "R"]]:
                     match param:
                         case "GAIN":
@@ -922,6 +910,7 @@ class NVDAVMWindow(psg.Window):
                         case "LIMIT":
                             self.vm.strip[int(index)].limit = 12
                             self[f"STRIP {index}||SLIDER {param}"].update(value=12)
+                    self.nvda.speak(f"{param} {12 if param == 'LABEL' else 0}")
 
                 # Bus Params
                 case [["BUS", index], [param]]:
@@ -935,7 +924,7 @@ class NVDAVMWindow(psg.Window):
                             self.TKroot.after(
                                 200,
                                 self.nvda.speak,
-                                f"{label} bus {param} {'on' if val else 'off'}",
+                                "on" if val else "off",
                             )
                         case "MONO" | "MUTE":
                             val = not val
@@ -944,7 +933,7 @@ class NVDAVMWindow(psg.Window):
                             self.TKroot.after(
                                 200,
                                 self.nvda.speak,
-                                f"{label} bus {param} {'on' if val else 'off'}",
+                                "on" if val else "off",
                             )
                         case "MODE":
                             bus_modes = util.get_bus_modes(self.vm)
@@ -969,7 +958,7 @@ class NVDAVMWindow(psg.Window):
                             self.TKroot.after(
                                 200,
                                 self.nvda.speak,
-                                f"{label} bus mode {phonetic.get(next_bus, next_bus)}",
+                                phonetic.get(next_bus, next_bus),
                             )
                 case [["BUS", index], [param], ["FOCUS", "IN"]]:
                     if self.find_element_with_focus() is not None:
@@ -987,13 +976,12 @@ class NVDAVMWindow(psg.Window):
                     label = self.cache["labels"][f"BUS {index}||LABEL"]
                     val = values[event]
                     self.vm.bus[int(index)].gain = val
-                    self.nvda.speak(f"{label} gain slider {val}")
                 case [["BUS", index], ["SLIDER", "GAIN"], ["FOCUS", "IN"]]:
                     if self.find_element_with_focus() is not None:
                         self.vm.event.pdirty = False
                         label = self.cache["labels"][f"BUS {index}||LABEL"]
                         val = values[f"BUS {index}||SLIDER GAIN"]
-                        self.nvda.speak(f"{label} gain slider {val}")
+                        self.nvda.speak(f"{label} gain {val}")
                 case [["BUS", index], ["SLIDER", "GAIN"], ["FOCUS", "OUT"]]:
                     self.vm.event.pdirty = True
                 case [["BUS", index], ["SLIDER", "GAIN"], ["KEY", "LEFT" | "RIGHT" | "UP" | "DOWN" as direction]]:
@@ -1003,8 +991,10 @@ class NVDAVMWindow(psg.Window):
                             val += 1
                         case "LEFT" | "DOWN":
                             val -= 1
-                    self.vm.bus[int(index)].gain = util.check_bounds(val, (-60, 12))
+                    val = util.check_bounds(val, (-60, 12))
+                    self.vm.bus[int(index)].gain = val
                     self[f"BUS {index}||SLIDER GAIN"].update(value=val)
+                    self.nvda.speak(str(val))
                 case [
                     ["BUS", index],
                     ["SLIDER", "GAIN"],
@@ -1016,8 +1006,10 @@ class NVDAVMWindow(psg.Window):
                             val += 3
                         case "LEFT" | "DOWN":
                             val -= 3
-                    self.vm.bus[int(index)].gain = util.check_bounds(val, (-60, 12))
+                    val = util.check_bounds(val, (-60, 12))
+                    self.vm.bus[int(index)].gain = val
                     self[f"BUS {index}||SLIDER GAIN"].update(value=val)
+                    self.nvda.speak(str(val))
                 case [
                     ["BUS", index],
                     ["SLIDER", "GAIN"],
@@ -1029,11 +1021,14 @@ class NVDAVMWindow(psg.Window):
                             val += 0.1
                         case "LEFT" | "DOWN":
                             val -= 0.1
-                    self.vm.bus[int(index)].gain = util.check_bounds(val, (-60, 12))
+                    val = util.check_bounds(val, (-60, 12))
+                    self.vm.bus[int(index)].gain = val
                     self[f"BUS {index}||SLIDER GAIN"].update(value=val)
+                    self.nvda.speak(str(val))
                 case [["BUS", index], ["SLIDER", "GAIN"], ["KEY", "CTRL", "SHIFT", "R"]]:
                     self.vm.bus[int(index)].gain = 0
                     self[f"BUS {index}||SLIDER GAIN"].update(value=0)
+                    self.nvda.speak(str(val))
 
                 # Unknown
                 case _: