vban-cmd-python/README.md

VBAN CMD

This package offers a Python interface for the Voicemeeter RT Packet Service. It allows a client to connect to a Voicemeeter installation on a remote machine so long as a valid connection can be established between both systems, and VBAN is configured correctly. In similar fashion to the Remote API you can set and get parameters for strips/buses.

Tested against

• Basic 1.0.8.1
• Banana 2.0.6.1
• Potato 3.0.2.1

Prerequisites

• Voicemeeter 1 (Basic), 2 (Banana) or 3 (Potato)
• Python 3.9+

Installation

git clone https://github.com/onyx-and-iris/vban-cmd-python
cd vban-cmd-python

Just the wrapper:

pip install .

With development dependencies:

pip install -e .['development']

Connection:

For sending a text request (remote set) several configuration options are available:

• ip: remote address
• streamname: default 'Command1'
• port: default 6990
• bps: bitrate of stream, default 0 should be safe for most cases.

pass these values as arguments to vban_cmd.connect() as show in the example below.

Regarding fetching data (remote get), the code registers itself to the RT Packet Service every 10 seconds, with a timeout of 15 seconds (same as streamer view app).

Use with a context manager:

Unlike the Remote API the VBAN RT Packet service has no login limitations since receiving data requires a client to simply register to the service. It is therefore advised to use this code only with a context manager. Parameter coverage is not as extensive for the RT Packet Service as with the Remote API so defined below are the classes/methods available through this package.

Example 1

import vban_cmd

class ManyThings:
    def __init__(self, vban):
        self.vban = vban

    def things(self):
        # Set the mapping of the second input strip
        self.vban.strip[1].A3 = True
        print(f'Output A3 of Strip {self.vban.strip[1].label}: {self.vban.strip[1].A3}')

    def other_things(self):
        # Toggle mute for the leftmost output bus
        self.vban.bus[0].mute = not self.vban.bus[0].mute


def main():
    with vban_cmd.connect(kind_id, ip=ip) as vban:
        do = ManyThings(vban)
        do.things()
        do.other_things()

if __name__ == '__main__':
    kind_id = 'potato'
    ip = '<ip address>'

    main()

API

Kinds

A kind specifies a major Voicemeeter version. Currently this encompasses

• basic
• banana
• potato

vban_cmd.connect(kind_id, ip=ip) -> '(VbanCmd)'

Factory function for remotes.

• ip: remote pc you wish to send requests to.

VbanCmd (higher level)

vban.type

The kind of the Voicemeeter instance.

vban.version

A tuple of the form (v1, v2, v3, v4).

vban.strip

An InputStrip tuple, containing both physical and virtual.

vban.bus

An OutputBus tuple, containing both physical and virtual.

vban.show()

Shows Voicemeeter if it's hide. No effect otherwise.

vban.hide()

Hides Voicemeeter if it's shown. No effect otherwise.

vban.shutdown()

Closes Voicemeeter.

vban.restart()

Restarts Voicemeeter's audio engine.

Strip

The following properties are gettable and settable:

• mono: boolean
• solo: boolean
• mute: boolean
• label: string
• gainlayer: float, -60 to 12
• gain: float, -60 to 12
• Output mapping (e.g. A1, B3, etc.): boolean, depends on the Voicemeeter kind

The following properties are settable:

• comp: float, from 0.0 to 10.0
• gate: float, from 0.0 to 10.0
• limit: int, from -40 to 12

Bus

The following properties are gettable and settable:

• mute: boolean
• mono: boolean
• eq: boolean
• eq_ab: boolean
• label: string
• gain: float, -60 to 12

VbanCmd (lower level)

vban.set_rt(id_, param, val)

Sends a string request RT Packet where the command would take the form:

f'{id_}.{param}={val}'

Errors

• errors.VMCMDErrors: Base VMCMD error class.

Tests

First make sure you installed the development dependencies

To run the tests from tests directory:

nosetests --r test -v

Resources

• Voicemeeter RT Packet Service