mirror of
https://github.com/onyx-and-iris/voicemeeter-api-python.git
synced 2024-11-22 11:00:47 +00:00
25 lines
1.3 KiB
Markdown
25 lines
1.3 KiB
Markdown
## About/Requirements
|
|
|
|
A simple demonstration showing how to use a midi controller with this API.
|
|
|
|
This script was written for and tested with a Korg NanoKontrol2 configured in CC mode.
|
|
|
|
In order to run this example script you will need to have setup Voicemeeter with a midi device in Menu->Midi Mapping.
|
|
|
|
## Use
|
|
|
|
The script launches Voicemeeter Banana version and assumes that is the version being tested (if it was already launched)
|
|
|
|
`get_info()` responds to any midi button press or midi slider movement and prints its' CC number and most recent value.
|
|
|
|
`on_midi_press()` should enable trigger mode for macrobutton 0 if peak level value for strip 3 exceeds -40 and midi button 48 is pressed. On the NanoKontrol2 midi button 48 corresponds to the leftmost M button. You may need to disable any Keyboard Shortcut assignment first.
|
|
|
|
For a clear illustration of what may be done fill in some commands in `Request for Button ON / Trigger IN` and `Request for Button OFF / Trigger OUT`.
|
|
|
|
## Resources
|
|
|
|
If you want to know how to setup the NanoKontrol2 for CC mode check the following resources.
|
|
|
|
- [Korg NanoKontrol2 Manual](https://www.korg.com/us/support/download/manual/0/159/1912/)
|
|
- [CC Mode Info](https://i.korg.com/uploads/Support/nanoKONTROL2_PG_E1_634479709631760000.pdf)
|